IsoPAQ-11L/-12L
1- & 2-channel Loop Powered
Isolators for Separation
of 0(4)-20 mA Signals

  IsoPAQ-11L and IsoPAQ-12L are 1- and 2-channel loop powered isolators used for electrical isolation of 0(4)-20 mA signals to avoid measurement errors due to different voltage potentials or ground loops in an instrument installation.
  The 2-channel version, IsoPAQ-12L offers a very cost effective alternative combined with a high-density mounting.
  The isolators need no power supply, which contributes to reduced installation costs compared to isolation transmitters.
  The high reliability ensures a safe system operation and low maintenance costs.

Complete data sheet>>>
User instruction>>>

Ordering information


 

     
        

      5 Years Warranty

IsoPAQ-110L Compact Line
1- & 2-channel Loop Powered
Isolators for
0(4)-20 mA Signals

  IsoPAQ-110L is a loop powered isolator, available in 1- and 2-channel versions. It is used for electrical isolation of
0(4)-20 mA signals to avoid measurement errors due to different voltage potentials or ground loops in an instrument installation.
  The 2-channel version, IsoPAQ-110L offers a very cost effective alternative combined with a high-density mounting.
  The isolator need no power supply, which contributes to reduced installation costs compared to Isolation Transmitters.
  The high reliability ensures a safe system operation and low maintenance costs.

Complete data sheet>>>
User instruction>>>

Ordering information

     
        

      5 Years Warranty

IsoPAQ-21L/-22L
1- & 2-channel Loop Powered
Isolators for 0(4)-20 mA Signals
with High Isolation and Protective
Separation

 IsoPAQ-21L and IsoPAQ-22L are 1- and 2-channel loop powered isolators used for electrical isolation of 0(4)-20 mA signals to avoid measurement errors due to different voltage potentials or ground loops in an instrument installation.
 The isolators need no power supply, which contributes to reduced installation costs compared to isolation transmitters.
 The high isolation level of 4 kV provides an effective protection for downstream devices.
 The 2-channel version, IsoPAQ-22L offers a very cost effective alternative combined with a high-density mounting.
 The high reliability and the Protective Separation are additional features that ensure a safe system operation.

Complete data sheet>>>
User instruction>>>

Ordering information

      5 Years Warranty

IsoPAQ-110R Compact Line
Transmitter Repeater for Powering and Isolation of 2-wire transmitters

  IsoPAQ-110R is a Transmitter Repeater for powering and isolation of a non-isolated 2-wire transmitter.
  Thanks to the isolation, the 4-20 mA transmitter signal can be connected to a grounded input circuit of a control system without risk for measurement errors due to ground loops.
  The Transmitter Repeater needs no power supply, which contributes to reduced installation costs.
  The high reliability ensures a safe system operation and low maintenance costs.

Complete data sheet>>>
User instruction>>>

Ordering information

     
        

      5 Years Warranty

IPAQ-L(mA)
Programmable 2-wire
Isolation Transmitter

 IPAQ-L(mA) is an active isolation transmitter for mA input signals with a 4-20 mA output in a 2-wire connection. It is suitable for direct connection to the input modules of a control system.
 Thanks to the programmable input range and the low input impedance, IPAQ-L(mA) meets almost any need for current signal isolation and load amplification.

Catalog Sheet>>>
User instruction>>>

Ordering information


 

    5 Years Warranty

IsoPAQ-30P
Basic Isolation Transmitter
for Unipolar mA/V Signals
with Calibrated Range Selection

 The Isolation Transmitter IsoPAQ-30P is a low-cost transmitter used for basic isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals.
 Due to the calibrated range selection of the input/output signals and the universal power supply, IsoPAQ-30P provides excellent flexibility and low storage and installation costs.
 The high reliability ensures a safe system operation and low maintenance costs.

Complete data sheet>>>
User instruction>>>

Ordering information

      5 Years Warranty

IsoPAQ-32P
Isolation Signal Splitter with Double Outputs for mA and V Signals

 The Isolation Signal Splitter IsoPAQ-32P is used for isolation and conversion of 0-20 mA, 4-20 mA, 0-5 V and 0-10 V standard signals. The input signal and the two output signals can be selected in any combination. The signal combination is decided by the Part No.
 The high accuracy and reliability and the Protective Separation are further features, which ensure a safe system operation.

Complete data sheet>>>
User instruction>>>

      5 Years Warranty

IsoPAQ-131P Compact Line
Basic Isolation Transmitter
for Unipolar mA/V Signals
with Calibrated Range Selection

  The Isolation Transmitter IsoPAQ-131P is used for isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals.
  For applications where normally one signal combination only is used,
IsoPAQ-131P offers a cost-effective alternative.
  The high reliability and the Protective Separation are further features, which ensure a safe system operation.

Complete data sheet>>>
User instruction>>>

Ordering information


 

      5 Years Warranty

IsoPAQ-40P
High-performance
Isolation Transmitter
for Unipolar mA/V Signals with
Calibrated Range Selection

 The Isolation Transmitter IsoPAQ-40P is used for high-precision isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals.
  Due to the calibrated range selection of the input/output signals, the selectable bandwidth and the universal power supply, IsoPAQ-40P provides excellent flexibility and low storage and installation costs.
  The high reliability and the Protective Separation are additional features that ensure a safe system operation.

Complete data sheet>>>  
User instruction>>>


Ordering information

      5 Years Warranty

IsoPAQ-41P
High-performance
Isolation Transmitter
for Unipolar mA/V Signals with
Fixed Ranges

 The Isolation Transmitter IsoPAQ-41P is used for high-precision isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals.
  For applications where normally only one signal combination is used, IsoPAQ-41P offers a cost-effective alternative.
  The high reliability and the Protective Separation are additional features that ensure a safe system operation.
 

Complete data sheet>>>
User instruction>>>

Ordering information


 

      5 Years Warranty

IsoPAQ-51P
High-performance
Isolation Transmitter for Unipolar
mA Signals with Fixed Range
and Zero/Span Adjustment

 The Isolation Transmitter IsoPAQ-51P is used for high-precision isolation of 0(4)-20 mA unipolar signals.
  For applications where normally only one signal combination is used, IsoPAQ-51P offers a cost-effective alternative.
  The zero and span adjustments allow for a fine-tuning of the measurement loop.
  The high reliability and the Protective Separation are additional features that ensure a safe system operation.

Ordering information

Complete data sheet>>>
User instruction>>>

      5 Years Warranty

DA561
Isolation Transmitter
for mA/V Signals with
2-wire Transmitter Supply

 DA561 is specially designed for signal isolation and load amplification in the process industry.
 A 2-wire transmitter can be connected to and supplied from the isolation amplifier.
 DA561 maintains a high isolation level (1,5 kV) between input and output.
 Current and voltage can be chosen independently as input and output signals.

Catalog Sheet>>>
Complete data sheet>>>
User instruction>>>

Ordering information

      5 Years Warranty

DA562
Dual Channel Isolation
Transmitter for mA/V Signals

 DA562 is specially designed for signal isolation and load amplification in the process industry.
 Two independent and galvanically isolated channels allow for high-density mounting.
 DA562 maintains a high isolation level (1,5 kV) between input, output and the two channels.
 Current and voltage can be chosen independently as input and output signals.

Catalog Sheet>>>
Complete data sheet>>>
User instruction>>>

Ordering information

      5 Years Warranty

IsoPAQ-161P Compact Line
Isolation Transmitter for
Bipolar and Unipolar mA/V Signals
with Fixed Range

  The Isolation Transmitter IsoPAQ-161P is mainly used for isolation of bipolar signals, such as ±20 mA, ±10 mA, ±10 V, ±5 V, and conversion into unipolar output signals.
  For applications where normally one signal combination only is used, IsoPAQ-161P offers a cost-effective alternative.
  The high reliability and the Protective Separation are further features, which ensure a safe system operation.

Complete data sheet>>>
User instruction>>>

Ordering information


 

      5 Years Warranty

IsoPAQ-60P
High-performance
Isolation Transmitter for
Bipolar and Unipolar mA/V Signals
with Extensive Range Selection
and Zero/Span Adjustment

 The Isolation Transmitter IsoPAQ-60P is used for high-precision isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V bipolar and unipolar signals.
  Due to the extensive range selection with a choice of 144 input/output signal combinations, the selectable bandwidth and the universal power supply, IsoPAQ-60P is a true universal transmitter for any demanding isolation application.
  The zero and span adjustments allow for a fine-tuning of the measurement loop.
  The high reliability and the Protective Separation are additional features that ensure a safe system operation.

Complete data sheet>>>
User instruction>>>

Ordering information


 

      5 Years Warranty

IsoPAQ-70S
Basic Isolation Transmitter
for Unipolar Shunt Voltages
with Calibrated Range Selection

 The Isolation Transmitter IsoPAQ-70S is used for isolation and conversion of unipolar shunt voltages into standard mA/V signal.
  Due to the calibrated range selection and the universal power supply, IsoPAQ-70S provides excellent flexibility and low storage and installation costs.
  The high reliability ensures a safe system operation and low maintenance costs.

Complete data sheet>>>  
User instruction>>>

Ordering information

      5 Years Warranty

IsoPAQ-80S
High-performance Isolation
Transmitter for Bipolar and Unipolar
Shunt Voltages with Extensive
Range Selection and Zero/Span Adjustment

 The Isolation Transmitter IsoPAQ-80S is used for high-precision isolation and conversion of bipolar and unipolar shunt voltages into standard mA/V signals.
  Due to the extensive range selection, the selectable bandwidth and the universal power supply, IsoPAQ-80S is a true universal transmitter for any demanding shunt voltage isolation application.
  The zero and span adjustments allow for a fine-tuning of the measurement loop.
  The high reliability and the Protective Separation are additional features that ensure a safe system operation.

Complete data sheet>>>
User instruction>>>

Ordering information


 

      5 Years Warranty

IPAQ-4L
Universal High-Isolation
4-wire Transmitter

 IPAQ-4L is a fully universal and programmable 4-wire (separately powered) transmitter. The high isolation provides safe and problem free measurements. Offering both current and voltage output, IPAQ-4L meets any process requirements. Designed for wall and DIN-rail mounting.

Catalog Sheet>>>
Complete data sheet>>>
User instruction>>>

Ordering information

      5 Years Warranty