Universal HART-compatible 2-wire transmitter with wireless communication
IPAQ C530 is a modern, HART® temperature transmitter developed to meet the highest standards of accuracy and reliability. A universal transmitter compatible with RTD, thermocouples, voltage and potentiometer sensors, offering high flexibility and reduces the number of installed product variants.
It is fully compatible with HART® 7 and offers extended diagnostic information (for example device error, sensor and wiring conditions) making it reliable and highly precise.
IPAQ C530 supports communication via NFC® (Near-field communication) and Bluetooth® which makes it possible to configure and monitor the transmitter remotely.
|Input||RTD, TC, mV, ohm|
|Input RTD||Pt100, Pt1000, Ni100, Ni120, Ni1000, Cu10|
|Input thermocouple||Type B, C, D, E, J, K, N, R, S, T|
|Type of transmitter||Digital|
|Output||4-20 mA, HART protocol|
|Galvanic isolation||1500 VAC|
|Measuring channels||1 channel|
|Sensor connection||2-, 3-, 4-wire connection|
|Power supply||IPAQ-C530: 8,5 to 36 VDC
IPAQ-C530X: 8,5 to 30 VDC
|Approvals||ATEX, IECEx, cFMus|
|HART® compliance||Fully compliant with the HART® 7 protocol
as well as the previous HART® 6 and 5.
|Typical accuracy||Max. ±0.08K or ±0.08% of span|
|Accuracy over time||Max. drift ±0,02% of span/year|
|Configuration||ConSoft, INOR Connect or EDD, DTM / FDT-system|
|Wireless connectivity||NFC® and Bluetooth® *|
|Vibration||IEC 60068-2-6, 10 g|
|EMC||EN 61326-1 and EN 61326-2-3|
|Humidity||0…98% RH (non-condensing)|
|Ambient temperature||–40…+85 °C / -40…+185 °F|
|Runtime counter||Hour counter for elapsed operational time|
|Simulated output||Fixed current ouput during a maximum time of 15 min|
|Adjustable filtering level||0,17 to 90 s (standard 0.9 s) (3-wire RTD)|
|Adjustments – Min. span||10°C / 18°F or according to the sensor|
|Adjustments – Zero point||Any value within range limits|
|Sensor error||NAMUR NE43|
|Error compensation||Sensor and system error correction|
* Bluetooth® communication is only supported together with ICON-BT