Transmitter Repeater for Powering and Isolation of 2-wire Transmitters
IsoPAQ-110R is a Transmitter Repeater for powering and isolation of a non-isolated 2-wire transmitter.
Thanks to the isolation, the 4-20 mA transmitter signal can be connected to a grounded input circuit of a control system without risk for measurement errors due to ground loops.
The Transmitter Repeater needs no power supply, which contributes to reduced installation costs.
The high reliability ensures a safe system operation and low maintenance costs.
- Transmitter isolation
- Transmitter powering
- High accuracy
- HART communication
- Fixed ranges
- Protective Separation acc. to EN 61140
- Compact DIN-rail mounting
|Type of input||Active|
|No. of channels||1 channel|
|Input signal||4…20 mA|
|Output signal||4…20 mA|
|Typical accuracy||0,1 % FS|
|Isolation level||2,5 kV, 50 Hz|
|Working voltage||600 VAC/DC|
|Power supply||15…30 VDC|
|Response time||< 10 ms|
|Ambient temperature||0…+55 °C|
|Housing width||11,2 mm|
|Installation depth||60 mm|